These instructions apply to Autodesk® Civil 3D® 2013 and newer, and screen shots are of Civil 3D 2020. They describe how to import georeferenced Nearmap imagery that you've exported with the Export Imagery tool in the Nearmap MapBrowser.

Please note that only certain versions of Autodesk support GIS functionality. Standard AutoCAD allow import of georeferenced imagery via the Raster Design Plugin.

Make sure that the path to your files, including the file name is no more than 128 characters. Autodesk will not detect the .jgw georeferencing file if the file path is more than 128 characters. After downloading your .jpg and .jgw files from MapBrowser, rename them to be shorter and identical.

These instructions assume that you have already followed the process described in our documentation on exporting imagery, and as a result have downloaded a Nearmap image with an accompanying .jgw file to your computer.

In addition to this document, you can watch our video. Note that the video uses Autodesk Civil 3D 2018.

.

Step 1 - Prepare Your Files

  1. Go to the location to which you downloaded the Nearmap image export.

  2. You should find a zip file containing a Nearmap image and .jgw file with similar filenames. If you only have an image, and not a zip file, follow the instructions in our document on exporting imagery and ensure that you select the option to download a georeference file with your image.

  3. Unzip the Nearmap download. You should have a .jpg and a .jgw file.

    Make sure that the path to your files, including the file name is no more than 128 characters. Autodesk will not detect the .jgw georeferencing file if the file path is more than 128 characters. After downloading your .jpg and .jgw files from MapBrowser, rename them to be shorter and identical.

Step 2 - Set up a Coordinate System

Before loading Nearmap georeferenced imagery, set up a coordinate system.

  1. In the Civil 3D Workspace view, from the Toolspace menu, click the Settings tab.



  2. Right-click on the drawing name and select Edit Drawing Settings.



  3. If you want to take measurements from Nearmap imagery, select a distance-based coordinate system - for example, UTM zones or local grid systems. Please refer to Natively Supported Coordinate Systems.

          

  4. Click Apply, then OK.

Step 3 - Import the image

  1. Enter command MAPCONNECT.



  2. In the Data Connections by Provider window, click Add Raster Image or Surface Connection.



  3. Click the image button and locate the Nearmap jpg imagery. Press Open.
        

  4. Press Connect.


  5. Press Add to Map.


    The image layer loads and displays.


Note: If the map does not appear to be loaded correctly, it may be that the coordinate system for the drawing is not set to the one downloaded. In that case, just reassign appropriately.




Configuring Measurements

If you would like to take measurements with Nearmap imagery, follow these additional steps:

  1. In the command box at the bottom of the screen, type "UN" and press Enter. The Drawing Units box appears - use this window to set appropriate measurement units.



  2. At the command box, enter "MEA" and select the MeasureGeom tool with an appropriate option. You can now take measurements using Nearmap imagery. The measurements will be shown on screen.