Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

These instructions apply to Autodesk® AutoCAD® Civil 3D 2016 and describe how to load georeferenced Nearmap imagery using Web Map Service (WMS).

Please note that only certain versions of AutoCAD (Map 3D and Civil 3D) support this functionality.

This guide covers the following topics:

In addition to this document, you can view our video on How to add a WMS connection in Autodesk.


To consume Nearmap imagery via WMS, you must authenticate using API Key Authentication.

The WMS URL you enter into your application must include your API Key. The WMS Links section of the the WMS Integration documentation describes how to copy the correct WMS URL, including your API Key, to the clipboard of your computer. Once you have done that, you can conveniently paste it into your application as required (see below).

Setting up a Coordinate System

Before loading Nearmap WMS imagery, set up a coordinate system.

  1. In the Civil 3D Workspace view, from the Toolspace menu, click the Settings tab.

  2. Right-click on the drawing name and select Edit Drawing Settings.

  3. If you want to take measurements from Nearmap imagery, select a distance-based coordinate system - for example, UTM zones or local grid systems. Please refer to Natively Supported Coordinate Systems.

  4. Click Apply, then OK

Loading the Nearmap WMS Imagery

  1. In the Planning and Analysis workspace view, click Connect.

  2. In the Data Connections by Provider window, click Add WMS Connection.

  3. In the Add a new connection panel, at Connection Name, enter Nearmap. At Server name or URL, enter the WMS URL, including your API Key:


    Australia & New Zealand

  4. Click Connect.

  5. Do not enter anything in the User Name and Password fields. Click Login.

  6. The Add Data to Map panel appears in the connection window. Expand the NearMap node and configure a layer:

    • Check a layer to select it.

    • Change the Image Format to jpeg. This step improves performance by using compression at a usually imperceptible cost in image quality.

    • Change the Server CS Code to your datum. For example, in the US select NAD83 UTM and your zone. If you select EPSG26910 and then you hover over it, you will see it's NAD83 / UTM zone 10.

  7. Check Combine into one layer, and give the layer a name. Then click Add to Map.

  8. The image layer loads and displays. As you zoom in, higher-resolution imagery loads on demand.

Configuring Measurements

If you would like to take measurements with Nearmap imagery, follow these additional steps:

  1. In the command box at the bottom of the screen, type "UN" and press Enter. The Drawing Units box appears - use this window to set appropriate measurement units.

  2. At the command box, enter "MEA" and select the MeasureGeom tool with an appropriate option. You can now take measurements using Nearmap imagery. The measurements will be shown on screen.

  • No labels