Page tree
Skip to end of metadata
Go to start of metadata

These instructions apply to Autodesk® AutoCAD® Map 3D 2016 and newer, and describe how to import georeferenced Nearmap imagery that you've exported with the Export Imagery tool in the Nearmap MapBrowser.

Please note that only certain versions of AutoCAD support GIS functionality. AutoCAD Civil 3D does as well. Standard AutoCAD packages as well as AutoCAD Plant 3D allow image import but not georeferencing.

Note: AutoCAD will not detect the .jgw georeferencing file if the file path is greater than 128 characters.

These instructions assume that you have already followed the process described in our documentation on exporting imagery, and as a result have downloaded a Nearmap image with an accompanying .jgw file to your computer.

In addition to this document, you can view our video on How to import a georeferenced image into Autodesk.

Step 1 - Prepare Your Files

  1. Go to the location to which you downloaded the Nearmap image export.

  2. You should find a zip file containing a Nearmap image and .jgw file with similar filenames. If you only have an image, and not a zip file, follow the instructions in our document on exporting imagery and ensure that you select the option to download a georeference file with your image.

  3. Unzip the Nearmap download.

  4. Make sure that:

    • The path to the .jgw file, including its filename, is up to 128 characters long.

    • The .jpg and .jgw filenames are identical, except for their extensions.

    • The EPSG code (the number after "EPSG" in the filenames of the .jpg and .jgw files) is retained in these filenames, or alternately, you keep a record of this number. You will need to use it soon.

Step 2 - Import the File to AutoCAD Map 3D

  1. Open AutoCAD Map 3D. From the Home tab, select Connect to open the Data Connections window.

  2. From the list of Data Connections by Provider, select Add Raster Image or Surface Connection.

  3. Give your connection a simple name.

  4. Select your .jpg file.

  5. Click Connect.


  6. Click Edit Coordinate Systems.

  7. In the Spatial Contexts list, select the first row and click Edit.

  8. In the Search box, enter the EPSG code for the projection in which you downloaded your .jpg. The EPSG code is found in the original filename of the .jpg and .jgw you downloaded from Nearmap.

    • If you downloaded your file in EPSG 3785, enter 3857 instead. This is the same projection, but Nearmap uses different naming conventions for it.

  9. Click Select, then click OK.

  10. Click Add to Map. Once your image displays, you can close the Data Connections window.

Note: If you see an Image Insertion window at this point, it means the .jgw world file did not load correctly. Ensure that the .jgw and .jpg filenames match. Also ensure that the filename, including the path, is no longer than 128 characters. AutoCAD will not detect the world file if its path is too long.

If you need to change the coordinate reference system, continue with Step 3 below.

Step 3 - Reproject your AutoCAD Map 3D Project

Reproject your AutoCAD Map 3D Project to a coordinate reference system appropriate for your local area. Please refer to Natively Supported Coordinate Systems.

Note: If you skip this step your file will not scale properly.

  1. Click the Map Setup tab.

  2. Click the Assign button.

  3. Search for an appropriate local coordinate reference system, and select it.

  4. Click Assign.

Your image will probably rotate slightly, indicating that it has been reprojected into your chosen coordinate reference system.

A useful way to check whether your images are displaying in an appropriate projection is to find a circular object on the ground (a roundabout, for example) and verify that it appears as a perfect circle.

Troubleshooting

Wrong Location

If you open the file and it is in the wrong location, it is likely that the file path is greater than 128 characters. Make sure  that the path to the .jgw file, including its filename, is up to 128 characters long.

Wrong Scale

If you open the file and the scale is wrong, it is likely that you did not reproject your AutoCAD Map 3D project (Step 3). Make sure you assign a coordinate system at the end, otherwise your file will not scale properly.


  • No labels